User's Manual

Quick Start

DEFAULT SETTINGS

SAVE USER SETTINGS AS DEFAULTS

For the RFID Reader to keep the customized settings as user defaults, you must issue

“#@sys_svusrtbl” command.

Note: After issuing the command, the current settings will be saved as user defaults.

Command:

#@sys_svusrtbl\r

Purpose Save User Defined Setting

Response OK\r

ERR,[code]\r

RESTORE USER/FACTORY DEFAULTS

For the RFID Reader to restore the User Defaults, which you have saved earlier, you must

issue “#@sys_ldstbl=1” command. Alternatively, you can also issue “#@sys_ldstbl=0”

command to restore Factory Default.

Command:

#@sys_ldstbl=[m]\r

Purpose Load Default Setting

Request #@sys_ldstbl=[m]\r

[m]: ‘0’ – Factory Default

‘1’ – User Default

Response OK\r

ERR,[code]\r

Note: Restore the default values will discount the Bluetooth

connection and erase all

connected devices.