User's Manual

1800 Series Handheld RFID Reader Reference Manual

POWER ON RFID READER

Be sure the battery is full charging before you power on the RFID Reader. Press the

<Trigger> to power on RFID Reader directly.

Note: The LED2 will flash blue when you power on the RFID Reader successfully.

CONNECTING USB CABLE

RFID Reader supports a USB port for connecting to the host computer. You can issue

commands via an available USB cable.

1) Remove the USB port cover.

2) Connect the USB communication cable to USB port. (USB logo shall face down)

3) Connect the other end of USB cable to the host computer.