User's Manual

151
Appendix I Firmware Upgrade
 For the communication settings, select
“RS-232/IrDA” and the correct COM port for
Direct USB Virtual COM interface.
 Ignore the baud rate setting.
 For the file option, click [Browse] to select the
target file e.g. U1860V*.SHX for firmware
update.
 Click [OK].
6) After upgrading, RFID Reader will restart automatically.
USE BLUETOOTH
®
DONGLE
1) Refer to 3.1.3 Bluetooth® HID and SPP Slave for the connection with Bluetooth
®
dongle.
2) After making a connection between Bluetooth
®
dongle and RFID Reader. Power off RFID
Reader.
3) Press <F2>+<Trigger> for 3 seconds to enter Firmware Upgrade Mode with LED1
flashing red, continual beeping.
4) Run the download utility “ProgLoad.exe” on host computer.