User's Manual

150
1800 Series Handheld RFID Reader Reference Manual
9) After making a connection between 3610 and RFID Reader. Power off RFID Reader.
10) Press <F2>+<Trigger> for 3 seconds to enter Firmware Upgrade Mode with LED1
flashing red, continual beeping.
11) Run the download utility “ProgLoad.exe” on the host computer.
 For the communication settings, select
“RS-232/IrDA” and the correct COM port for
USB Virtual COM interface.
 Ignore the baud rate setting.
 For the file option, click [Browse] to select the
target file e.g. U1860V*.SHX for firmware
update.
 Click [OK].
12) After upgrading, RFID Reader will restart automatically.
USE DIRECT USB VIRTUAL COM
1) Use the provided USB cable to connect RFID Reader to the USB port of host computer.
You will need to install USB cable driver firstly.
2) Refer to Using HyperTerminal
for connecting with USB cable.
3) After making a connection between host computer and RFID Reader. Power off RFID
Reader.
4) Press <F2>+<Trigger> for 3 seconds to enter Firmware Upgrade Mode with LED1
flashing red, continual beeping.
5) Run the download utility “ProgLoad.exe” on the host computer.