User's Manual

149

Upgrade firmware to one RFID reader at a time. For example, turn off each of the rest RFID

reader when there is more than one RFID reader connected to host computer.

Note: 1. Ensure the RFID reader has a fully charged battery prior to attempting a firmware

upgrade.

2. In order to avoid the data loss during firmware upgrade. Please save or upload all

the data from the flash memory before beginning firmware upgrade.

BEFORE UPGRADING

Before firmware upgrade, you have to configure the upgrade interface with “#@sys_dlfw”

command firstly.

Command:

#@sys_dlfw=[m]\r

Purpose Load Default Setting

Request #@sys_dlfw=[m]\r

[m]: ‘0’ –

Current interface

‘1’ –

‘2’ – USB

Response OK\r

ERR,[code]\r

HOW TO UPGRADE FIRMWARE

USE 3610

7) Connect 3610 to the USB port of host computer after installing its driver.

8) Refer to 3.2 Connecting via 3610

for connecting to 3610.

Appendix I

FIRMWARE UPGRADE