User's Manual

110
1800 Series Handheld RFID Reader Reference Manual
Response OK,[m]\r (Default m= ‘0’)
[m]: Data Length Type
‘0’- Total RFID Data Length. Separators are not included.
‘1’- EPC Length
‘2’- Memory Data Length
ERR,[code]\r
#@dat_rflen=[m]\r
Purpose Set the RFID Data Length
Response OK\r
ERR,[code]\r
Example:
4.4 PREFIX/SUFFIX CODE
By default, there is no prefix code configured to Counter and RFID Data Section, and
[ENTER] or [CR] (Carriage Return) is configured to be suffix code for RFID Data Section. Up
to 8 characters can be configured, for example, “Tag_Test”, and you will have the string
appeared in front of the tag read, like this – “Tag_Test300034303331
30303132303030304221”. If the specified content is longer than 8 bytes, it will be
truncated.
Prefix/Suffix Section
For a prefix or suffix parameter, you have to specify for which one section (e.g. Data