User's Manual

103
Chapter 4 Define Output Format
ERR,[code]\r
#@dat_tms=[m]\r
Purpose Set to Display Millisecond
Response OK\r
ERR,[code]\r
Example:
4.3.2 DATA COUNT SECTION
Define a serial number to output data. The serial number would be specified into 6 digits
beginning from 000001. When the counter is up to 999999, it will be renewed from 000001.
Reset Counter Event
There are three events supported to reset the counter. When the parameter is ‘1’, the output
data will be counted from the beginning for each event happen.
Command:
#@dat_rstcnt?\r
Purpose Get the Setting of Reset Counter Event
Response
OK,[m],[n],[o]\r (Default m=
‘0’, n= ‘0’, o= ‘1’)
Reset Event Enable Disable