User's Manual

100
1800 Series Handheld RFID Reader Reference Manual
[p]: separator between field4 and field5. Default= ‘20’ (‘ ’)
[q]: separator between field5 and field6. Default= ‘3A’ (‘:’)
[r]: separator between field6 and field7. Default= ‘20’ (‘ ’)
ERR,[code]\r
#@dat_tspr=[m],[n],[o],[p],[q],[r],[s]\r
Purpose Set the Separators of Field in Time Stamp Section
Request #@dat_tspr=[m],[n],[o],[p],[q],[r],[s]\r
[m]: input data format, ‘0’- in Hexadecimal, ‘1’- in character
[n]: separator between field1 and field2
[o]: separator between field2 and field3
[p]: separator between field3 and field4
[q]: separator between field4 and field5
[r]: separator between field5 and field6
[s]: separator between field6 and field7
Response OK\r
ERR,[code]\r
Note: Input ‘00’ (hexadecimal) to clear the inputted data.
Example: