User's Manual

97
Chapter 4 Define Output Format
In order to transmit data quickly, the system may break the data into small chunks as
packet data. This data will be presented as below format.
Hexadecimal:
The output data is consisted of 16 unique symbols, the numbers 0 to 9 and the letters A to
F. Specified for every byte (8 bits) as two consecutive hexadecimal digits. It is easier for
users to read hexadecimal numbers than binary numbers.
Raw Data:
This is as know as source data without processing in order to be displayed in any sort of
presentable form. Just like binary code, sometime it can be nothing more than a series of
numbers specified for important information. Host computer may interpret this information
and give a readout that then may make sense to the RFID Reader.
4.3 DATA OUTPUT
A data output would be divided into three sections:
 Each section can be enabled or disabled.
 Each section has individual prefix and suffix.
 The sequence for each section can be adjusted.