User's Manual

95
You may configure the format of the collected data output to the host computer. Tags read
by the RFID Reader can be configured below –
1) Decide the output format.
2) Define the data fields for Time stamp, Data Count and Data sections.
3) Set the separators to each section.
4) Define output length to the data.
5) Add Prefix Code
and Suffix Code before transmission.
6) Decide the output sequence of Time stamp, Data Count and Data sections.
IN THIS CHAPTER
4.1 Letter Case (HID Mode Only) ....................................... 96
4.2 Output Format........................................................... 96
4.3 Data Output .............................................................. 97
4.4 Prefix/Suffix Code ..................................................... 110
4.5 Section Sequence ..................................................... 113
Chapter 4
DEFINE OUTPUT FORMAT