Product Info

RELEASE NOTES
Version Date Notes
2.22 Oct. 08, 2019
 Modified: Symbologies Supported – GS1 DataBar Family enabled
by default; UPCA Addon 2/Addon 5 appended
 Modified: Setup QR Code – QR Code limited
 Modified: 1.2.1 Transmit Buffer – Continuous Decoding setting
barcodes added
 Modified: 1.3 LED Indicator – Green flashing defined for fully
charged
 Modified: 1.3 LED Indicator – Red flashing 5 times indicates low
battery warning for firmware upgrade
 Modified: 1.4 Beeper –Low battery warning when the scanner gets
into download mode for firmware upgrade
 Modified: 1.4.3 Low Battery Alarm – time interval description
 New: 1.4.4 Bell Ring
 New: 1.7.8 Multicode Mode (1664 Only)
 New: 1.7.9 Release Mode
 Modified: 1.9 Delay between Re-read – Laser mode added
 Modified: 2.1 Bluetooth® HID – Alt Composing added
 Modified: 2.1.6/2.4.5/2.6.5 HID Character Transmit Mode – By
Character as default
 Modified: 2.1.7 Special Keyboard Feature – “Bypass with Control
Character Output for Windows” added
 New section title for 2.1.9 HID Keyboard Layout (Apple & Non-
Apple System)
 Modified: 2.1.10 Transmit Speed – Fast by default
 Modified: 2.1.11 BT HID Slave/Master Switching – Master by
default
 Modified: 2.3.1 Activate Bluetooth® SPP Master Mode - QR
Code example
 Modified: 2.6.7 USB Polling Interval – 4ms by default
 Modified: 3.1.1 Connect to 3610 – QR Code example
 Modified: 3.2.4 Secure Simple Pairing – enabled by default
 Modified: 4.13.2 GS1 DataBar Omnidirectional (RSS-14) –
enabled by default, Transmit Code ID disabled by default
 Modified: 4.13.3 GS1 DataBar Expanded (RSS Expanded) -
enabled by default, Transmit Code ID disabled by default
 Modified: 4.13.4 GS1 DataBar Limited (RSS Limited) - enabled
by default, Transmit Code ID disabled by default
 Modified: change section article to 5.2.1 Single Character
Substitution (previous article: Select a Set for Character
Substitution)