Product Info

1662/1664 Barcode Scanner User Guide

1.13 USE DIRECT USB CABLE

1662/1664 supports Direct USB interface for charging the battery and/or sending data to

the host in memory mode. Refer to 1.2.2 Memory Mode.

Note: The scanner will not function when it is solely on USB power and without a battery

loaded.

1.13.1 DIRECT USB INTERFACE

When it is set to Memory Mode and connected to computer via the Direct USB cable, the

default output interface becomes “Direct USB Virtual COM”, change it to “Direct USB HID”

if required.

For details on configuring the interface settings, refer to the following sections:

 2.6 Direct USB HID

 2.7 Direct USB Virtual COM

*Activate Direct

USB Virtual COM

Activate Direct

USB HID

1.13.2 DISABLE DIRECT USB INTERFACE

When connecting the USB cable to the scanner for charging the battery, ensure the

“Disable Direct USB” barcode has been scanned to avoid sending data to the host in

memory mode. In this mode the USB cable function will be charging the battery only.

Disable Direct USB

Enter Setup