Product Info

Chapter 1 Understanding the Barcode Scanner

1.4.3 LOW BATTERY ALARM

By default, the beeper is enabled to give a warning when the battery charge gets low. In

order to prevent data loss, you are advised to replace the battery immediately when you

hear two short beeps (high tone).

Low Battery Alarm Time Interval

Description

1.5 seconds During scanner operation

10 seconds The scanner idles for 30 seconds

Disable (No Alarm)

*Enable Low Battery

Alarm

1.4.4 BELL RING

With this function enabled, the scanner will produce a bell ring when receiving the ‘0x07’

character which is sent via BT SPP Slave, BT SPP Master, RS232 via BT cradle, VCOM via

BT cradle, or VCOM CDC via BT cradle interface.

Enable

*Disable

Update