Product Info

Chapter 1 Understanding the Barcode Scanner
to try and re-connect.
Red,
flashing
--- --- Flashing red (On/Off ratio 0.2 s: 0.2 s) indicates the scanner has
failed to transmit data stored in memory. Press any key to stop
flashing.
Red,
flashing
--- --- Accompanied with beeping, flashing red for three times indicates
the present scanner battery capacity is running low. This happens
at one-minute intervals.
Red,
flashing
--- --- After a good read, flashing red for three times indicates the
present scanner battery capacity is running low.
Red,
flashing
--- --- When scanning the “Download” barcode, flashing red for five
times indicates the present scanner battery voltage is below 3.7v
and the scanner won’t get into Download mode.
1.3.1 GOOD READ LED
*Enable
Good Read LED
Disable
Good Read LED
1.3.2 GOOD READ LED DURATION
By default, the Good Read LED stays on for 40 milliseconds. Specify a value, ranging
from 1 to 254 in units of 10 milliseconds.
Good Read LED
Time-out after
0.01~2.54 sec.
(*40 ms)
1) Read the barcode above to specify the time interval before the Good Read LED goes
off.
2) Read the “Decimal Value” barcode on page 271. For example, read “1” and “5” for the
LED to go off after 150 milliseconds.
3) Read the “Validate” barcode on the same page to complete this setting.
31
Update