Product Info

1662/1664 Barcode Scanner User Guide

1.1.1 POWER LEVEL

Scan the barcode below to get the battery capacity information with each increment of

20 in percentage terms.

Remaining Battery

Capacity

1.1.2 HOW TO OPERATE THE SCANNER

Turn on the scanner…

Press the [Power/Delete] key for 2 seconds. The scanner will respond with a long beep (high tone),

and its LED indicator will become solid red and go off.

Turn off the scanner…

Press the [Power/Delete] key for 2 seconds. The scanner will respond with two short beeps (high

tone) and the LED will become solid red. Release the key then. Otherwise, let the scanner turn off

automatically in specific circumstances.

Delete the last collected data when in memory mode …

Press the [Power/Delete] key. The scanner will respond with two short beeps (high tone) and the

LED will become solid red. Before the LED goes off (within 1 second), press the [Power/Delete] key

again to confirm the deletion.

Enable/Disable the [Delete] key function

Scan the barcode below to enable/disable the [Delete] key. By default, users can press the

[Power/Delete] key to delete data. If the function is disabled, pressing the key to delete data is not

allowed.

*Enable

Disable

Enter Setup