Product Info

DEFINING OUTPUT FORMAT
Chapter 5
You may configure the format of the collected data output to the host computer.
Barcodes read by the scanner will be processed in the following sequence –
1) Perform character substitution on the data scanned.
2) Add Code ID and Length Code to the front of the data:[Code ID][Length Code][Data]
3) Process the whole data in step 2 with user formats. Data is now divided into fields by
user specified rules. Refer to Chapter 6 Applying Formats for Data Editing.
4) Add Prefix Code and Suffix Code before transmission:[Prefix Code][Processed
Data][Suffix Code]
IN THIS CHAPTER
5.1 Letter Case .............................................................. 181
5.2 Character Substitution ............................................... 182
5.3 Prefix/Suffix Code ..................................................... 196
5.4 Code ID ................................................................... 197
5.5 Length Code............................................................. 204
5.6 Multi-Barcode Editor .................................................. 212
5.7 Removal of Special Character ..................................... 216
5.8 AIM Code ID ............................................................... 216
5.1 LETTER CASE
By default, the alphabetics transmission is case-sensitive, meaning that the alphabet will
be transmitted according to their original case. Ignoring the original letter case, select
[Upper Case] to output data in upper case only; otherwise, select [Lower Case] to output
data in lower case only.
Update
181
*Normal
Upper Case
Lower Case