Product Info

2.17 May 09, 2014
 New: 1.20 – Serial Number Stamp
 New: 1.20.1 – Separator between Serial Number and Data
 New: 2.1.10 – BT HID Slave/Master Switching
 New: 2.1.11 – BT HID Auto-Reconnection
 New: 2.5.2 – Activate USB Virtual COM_CDC
 New: 2.6.7 – USB Polling Interval
 Modified: 3.2.2 – length of device name changed to 13 bytes (max.)
 New: 4.11.3 – GS1 Formatting, Application ID Mark
 Modified: 4.13.2 – add GS1 formatting (Omnidirectional) barcodes
 Modified: 4.13.3 – add GS1 formatting (Expanded) barcodes
 Modified: 4.13.4 – add GS1 formatting (Limited) barcodes
 New: 4.13.6 – Field Separator
 New: 4.13.7 – Application ID Mark
 New: 4.21.1 – add GS1 formatting (Composite CC-A/B) barcodes
 New: 4.21.2 – add GS1 formatting (Composite CC-C) barcodes
 New: 4.21.6 – Field Separator
 New: 4.21.7 – Application ID Mark
 Modified: Appendix I – Notes for upgrading 3610 CPU/Bridge
firmware added
2.16 Mar. 06, 2014
 Modified: Care & Maintenance – “Keep the scanner away from any
magnets and magnetic fields to prevent the laser engine from
malfunctioning.” added
 Modified: 1.1.2 - Enable/Disable the [Delete] key barcodes added
 Modified: 1.17.3 – Illumination Brightness setup barcode added
 Modified: 3.2.2 – Changing Device Name barcode added
 Modified: Appendix II – #$ShowScanner, #$SelectScannerN,
#@BEEP,xx, #@RLED,xx, #@GLED,xx, #@VIBR,xx added
 Modified: Appendix III – remove “Send” from “CR*/Send/ENTER*”
2.15 Jul. 19, 2013
 Added: 1.18.3 Disable Hardware Reset (setting barcodes)
2.14 Jun. 10, 2013
 Added: 1.19 Mobile Phone/Display Mode
 Added: 2.1.9 Transmit Speed
 Added: 3.2.4 Secure Simple Pairing (2.1.9 Simple Pairing for
iPhone/iPad removed)
 Added: 4.15.1 EAN-8 – Check Digit function barcode added
 Added: 4.16.3 EAN-13 – Check Digit function barcode added
2.13 Mar. 20, 2013
 Add: 2.3.1 Activate Bluetooth SPP Master Mode – 2D barcode
for connecting to a target device
 Add: 3.1.1 Connect to 3610 – 2D barcode for connecting to 3610