User Manual

53
Update
Chapter 2 錯誤! 使用 [常用] 索引標籤將 Heading 1 套用到您想要在此處顯示的文字。
2.1.1 ACTIVATE BLUETOOTH
®
HID & SELECT KEYBOARD TYPE
When Bluetooth
®
HID interface is activated, you will have to select a keyboard type to
complete this setting. By default, Bluetooth
®
HID is activated on the scanner, and the
keyboard type is set to PCAT (US).
Activate Bluetooth
®
HID & Select Keyboard
Type…
1) Read the barcode above to activate Bluetooth
®
HID and select a keyboard type.
2) Read the “Decimal Value
” barcode on page 251. Refer to the table below for the
number of desired keyboard type.
3) Read the “Validate” barcode on the same page to complete this setting.
Bluetooth
®
HID
By default, the keyboard type is set to PCAT (US). The following keyboard types are supported —
No. Keyboard Type No. Keyboard Type
64 PCAT (US) 71 PCAT (Belgium)
65 PCAT (French) 72 PCAT (Spanish)
66 PCAT (German) 73 PCAT (Portuguese)
67 PCAT (Italy) 74 PS55 A01-2 (Japanese)
68 PCAT (Swedish) 75 User-defined table
69 PCAT (Norwegian) 76 PCAT (Turkish)
70 PCAT (UK) 77 PCAT (Hungarian)