User Manual

Update

Chapter 1 錯誤! 使用 [常用] 索引標籤將 Heading 1 套用到您想要在此處顯示的文字。

1.13 USING DIRECT USB CABLE

1664 supports Direct USB interface for charging the battery and/or sending data to the

host in memory mode. Refer to 1.2.2 Memory Mode

Note: The scanner is not allowed to function when it is solely on USB power and without

a battery loaded.

1.13.1 DIRECT USB INTERFACE

When it is set to Memory Mode and connected to computer via the Direct USB cable, the

default output interface becomes “Direct USB Virtual COM”. Change it to “Direct USB

HID”.

For details on configuring the interface settings, refer to the following sections:

 2.6 Direct USB HID

 2.7 Direct USB Virtual COM

*Activate Direct

USB Virtual COM

Activate Direct

USB HID

1.13.2 DISABLE DIRECT USB INTERFACE

When connecting the Direct USB cable, have the scanner to read the “Disable Direct

USB” barcode in advance to avoid sending data to the host in memory mode via the

cable. It will then allow charging the battery only.

Disable Direct USB