Product Info

48
Enter Setup
1663 A
Barcode Scanner
User Guide
1.15 PAGER BEEP DURATION
Paging function is only activated when 1663 A is in Power-Saving mode. 1663 A can be
woken up via receiving any Bluetooth
®
status command by pressing a key on the host
keyboard. The buzzer will continuously sound two short high tone beeps until the power
key is pressed on the scanner or the timeout is reached, and the scanner re-enters
power saving mode.
By default, the pager beep duration is 5 seconds. Specify a value, ranging from 0 to 15.
(0~15 sec.; 0= Disable)
 Bluetooth
®
HID profile: Press any one of the following keys “Scroll Lock”, “Number
Lock” or “Caps Lock” on the host computer to trigger the waking up of 1663 A.
 Bluetooth
®
SPP Profile: Any command sent using Bluetooth
®
SPP will trigger the
waking up of 1663 A.
Pager Beep Duration
0~15 sec.
(*5 s)
1) Read the barcode above to specify the desired beep active time.
2) Read the “Decimal Value” barcode on page 錯誤! 尚未定義書籤。. For example, read “1”
and “5” for the pager beep function to be activated each 15 seconds after entering
Power-Saving mode.
3) Read the “Validate” barcode on the same page to complete this setting.