Product Info

161

Update

You may configure the format of the collected data output to the host computer.

Barcodes read by the scanner will be processed in the following sequence –

1) Perform character substitution on the data scanned.

2) Add Code ID and Length Code to the front of the data:[Code ID][Length Code][Data]

3) Process the whole data in step 2 with user formats. Data is now divided into fields by

user specified rules. Refer to Chapter 6 Applying Formats for Data Editing.

4) Add Prefix Code and Suffix Code before transmission:[Prefix Code][Processed

Data][Suffix Code]

IN THIS CHAPTER

5.1 Letter Case .............................................................. 159

5.2 Character Substitution ............................................... 160

5.3 Prefix/Suffix Code ..................................................... 168

5.4 Code ID ................................................................... 169

5.5 Length Code ............................................................. 174

5.6 Multi-Barcode Editor .................................................. 178

5.7 Removal of Special Character ..................................... 182

5.1 LETTER CASE

By default, the alphabetics transmission is case-sensitive, meaning that the alphabet will

be transmitted according to their original case. Ignoring the original letter case, select

[Upper Case] to output data in upper case only; otherwise, select [Lower Case] to output

data in lower case only.

*Normal

Upper Case

Lower Case

Chapter

DEFINING OUTPUT FORMAT