User's Manual

48
Enter Setup
1663 Barcode Scanner User Guide
1.15 PAGER BEEP DURATION
Paging function is only ac tivated when 1663 is in Po wer-Saving mode. 1663 can be
woken up via rec eiving any Bluetooth
®
status command by pressing a key on the host
keyboard. The buzzer will continuously sound two short high tone beeps until the power
key is pressed on the scanner o r the timeout is reached, and the scanner re-enters
power saving mode.
By default, the pager beep duration is 5 seconds. Specify a value, ranging from 0 to 15.
(0~15 sec.; 0= Disable)
 Bluetooth
®
HID profile: Press any one of the following keys “Scroll Lock”, “Number
Lock” or “Caps Lock” on the host computer to trigger the waking up of 1663.
 Bluetooth
®
SPP Profile: Any command sent u sing Bluetooth
®
SPP will trigger the
waking up of 1663.
Pager Beep Duration
0
~15 sec.
(*5 s)
1) Read the barcode above to specify the desired beep active time.
2) Read the “Decimal Value
” barcode on page 219. For example, read “1” and “5” for the
pager beep function to be activated each 15 seconds after entering Power-Saving
mode.
3) Read the “Validate” barcode on the same page to complete this setting.