User's Manual
Table Of Contents
- IMPORTANT NOTICES
- RELEASE NOTES
- INTRODUCTION
- QUICK START
- UNDERSTANDING THE BARCODE SCANNER
- 1.1 BATTERY
- 1.2 MEMORY
- 1.3 LED INDICATOR
- 1.4 BEEPER
- 1.5 VIBRATOR
- 1.6 SEND “NR” TO HOST
- 1.7 SCAN MODES
- 1.8 SCANNING TIMEOUT
- 1.9 DELAY BETWEEN RE-READ
- 1.10 READ REDUNDANCY FOR ALL SYMBLOGIES
- 1.11 ADDON SECURITY FOR UPC/EAN BARCODES
- 1.12 NEGATIVE BARCODES
- 1.13 EFFECTIVE DECODING AREA
- 1.14 USE DIRECT USB CABLE
- 1.15 PAGER BEEP DURATION
- 1.16 TIME STAMP
- 1.17 HARDWARE RESET
- SELECTING OUTPUT INTERFACE
- SET UP A WPAN CONNECTION
- CHANGE SYMBOLOGY SETTINGS
- 4.1 CODABAR
- 4.2 CODE 25 – INDUSTRIAL 25
- 4.3 CODE 25 – INTERLEAVED 25
- 4.4 CODE 25 – MATRIX 25
- 4.5 CODE 39
- 4.6 CODE 93
- 4.7 CODE 128
- 4.8 EAN-8
- 4.9 EAN-13
- 4.10 GS1-128 (EAN-128)
- 4.11 ISBT 128
- 4.12 MSI
- 4.13 FRENCH PHARMACODE
- 4.14 ITALIAN PHARMACODE
- 4.15 PLESSEY
- 4.16 GS1 DATABAR (RSS FAMILY)
- 4.17 TELEPEN
- 4.18 UPC-A
- 4.19 UPC-E
- DEFINING OUTPUT FORMAT
- APPLYING FORMATS FOR DATA EDITING
- SPECIFICATIONS
- FIRMWARE UPGRADE
- HOST SERIAL COMMANDS
- KEYBOARD WEDGE TABLE
- NUMERAL SYSTEMS
21
Update
This chapter explains the features and usage of the barcode scanner.
IN THIS CHAPTER
1.1 Battery..................................................................... 21
1.2 Memory
.................................................................... 26
1.3 LED Indicator ............................................................ 29
1.4 Beeper
..................................................................... 31
1.5 Vibrator
.................................................................... 34
1.6 Send “NR” to
Host ..................................................... 35
1.7 Scan Modes .............................................................. 36
1.8 Scanning Ti
meout ...................................................... 41
1.9 Delay between Re-
read............................................... 42
1.10 Read Redundancy for Al
l Symblogies........................... 43
1.11 Addon Security for UPC
/EAN Barcodes ........................ 44
1.12 Negative Barcodes
................................................... 44
1.13 Effective Decodi
ng Area ............................................ 45
1.14 Use Direct USB Ca
ble................................................ 47
1.15 Pager Beep Duration
................................................. 48
1.16 Time Stamp
............................................................ 49
1.17 Hardware Reset
....................................................... 53
1.1 BATTERY
The scanner is battery-powered: Use a rechargeable 3.7 V/850 mAh Li-ion battery. For
intensive data collect ion, please prepare spare battery or batteries for non-stop
operation.
Note: (1) The rechargeable battery for 1663 may not be fully charged when shipped. We
suggest charging it to full before use.
(2) The scanner can be configured to save battery power. Refer to settings of
“Auto Power Off & Power-Saving
”, “Sniff Mode”, as well as “Low Battery Alarm”.
Chapter 1
UNDERSTANDING THE BARCODE SCANNER