User's Manual
Table Of Contents
- IMPORTANT NOTICES
- RELEASE NOTES
- INTRODUCTION
- QUICK START
- UNDERSTANDING THE BARCODE SCANNER
- 1.1 BATTERY
- 1.2 MEMORY
- 1.3 LED INDICATOR
- 1.4 BEEPER
- 1.5 VIBRATOR
- 1.6 SEND “NR” TO HOST
- 1.7 SCAN MODES
- 1.8 SCANNING TIMEOUT
- 1.9 DELAY BETWEEN RE-READ
- 1.10 READ REDUNDANCY FOR ALL SYMBLOGIES
- 1.11 ADDON SECURITY FOR UPC/EAN BARCODES
- 1.12 NEGATIVE BARCODES
- 1.13 EFFECTIVE DECODING AREA
- 1.14 USE DIRECT USB CABLE
- 1.15 PAGER BEEP DURATION
- 1.16 TIME STAMP
- 1.17 HARDWARE RESET
- SELECTING OUTPUT INTERFACE
- SET UP A WPAN CONNECTION
- CHANGE SYMBOLOGY SETTINGS
- 4.1 CODABAR
- 4.2 CODE 25 – INDUSTRIAL 25
- 4.3 CODE 25 – INTERLEAVED 25
- 4.4 CODE 25 – MATRIX 25
- 4.5 CODE 39
- 4.6 CODE 93
- 4.7 CODE 128
- 4.8 EAN-8
- 4.9 EAN-13
- 4.10 GS1-128 (EAN-128)
- 4.11 ISBT 128
- 4.12 MSI
- 4.13 FRENCH PHARMACODE
- 4.14 ITALIAN PHARMACODE
- 4.15 PLESSEY
- 4.16 GS1 DATABAR (RSS FAMILY)
- 4.17 TELEPEN
- 4.18 UPC-A
- 4.19 UPC-E
- DEFINING OUTPUT FORMAT
- APPLYING FORMATS FOR DATA EDITING
- SPECIFICATIONS
- FIRMWARE UPGRADE
- HOST SERIAL COMMANDS
- KEYBOARD WEDGE TABLE
- NUMERAL SYSTEMS
6
Enter Setup
1663 Barcode Scanner
User Guide
INSIDE THE PACKAGE
The items included in the package may be di fferent, depending on your order. Save the
box and packaging material for future use in case you need to store or ship the scanner.
1663 Scanner
CipherLab Dongle (3610) Optional
Rechargeable Li-ion Battery Pack
Direct USB Cable
Wristband
Setup Cards
Quick Start Guide
Product CD
Note: The CD-ROM includes this manual and Windows-based ScanMaster software for
configuration, as well as the USB Virtual COM driver.
PRODUCT HIGHLIGHTS
Small-form-factor and built tough to survive drop test.
Extremely low power consumption.
Firmware upgradeable.
Support most popular barcode symbolog ies, including GS1-128 (EAN-128), GS1
DataBar (RSS) etc.
Support Time Stamp and Paging functions.
Support negative barcodes.
Support different scan modes, including Aiming Mode and Multi-Barcode Mode.
LED indicator, beeper and vibrator for status verification or warning.
Beeping tone and duration programmable for Good Read.
4MB flash memory for Memory Mode operation, storing over 240,000 scans based on
EAN-13 barcodes.
Provides up to 10 KB SRAM for reserve buffer while getting out of range over a
wireless personal area network (WPAN), storing up to 640 scans based on EAN-13
barcodes.
Capable of transmitting scanned data, emulating a serial cable (Bluetooth
®
SPP) or as
keyboard input (Bluetooth
®
HID), to a notebo ok computer or PDA with Bluetooth
®
wireless technology.
Programmable parameters including data output format, editing format, symbologies.
Easy configuration through ScanMaster.
Easy connection through CipherConnect, readily available via online marketplace for
mobile devices running on Android 2.x, BlackBerry 5.x, or Windows Mobile 6.x.