User's Manual

150
Enter Setup
1663 Barcode Scanner User Guide
5.2 CHARACTER SUBSTITUTION
Character substitution is performed on every occurrence of the first character specified. If
only one character is specified, every occurrence of that character in the barcode will be
taken away.
 The first character will be replaced by the second character(s).
 Up to three sets of character substitution can be configured.
 If “Bluetooth
®
HID” or “USB HID” is configured for interface, Key Type and Key Status
will then become appl icable. You may decide w hether or not to apply Key Status
when “Normal Key” is selected for Key Type.
Key Type Key Status
Scan Code Only 1 scan code value is allowed.
Refer to 5.2.1 Select a S et for
Character Substituion.
N/A
Normal Key Up to 3 character strings are allowed.
 Add Shift
 Add Left Ctrl
 Add Left Alt
 Add Right Ctrl
 Add Right Alt
Refer to Keyboard Wedge Table
.
Note: The character substitution is performed only on the barcode itself and before the
processing of editing formats. It is n ot applicable to the Prefix/Suffix Code, Code
ID, Length Code, or any Additional Field.