User's Manual
Table Of Contents
- IMPORTANT NOTICES
- RELEASE NOTES
- INTRODUCTION
- QUICK START
- UNDERSTANDING THE BARCODE SCANNER
- 1.1 BATTERY
- 1.2 MEMORY
- 1.3 LED INDICATOR
- 1.4 BEEPER
- 1.5 VIBRATOR
- 1.6 SEND “NR” TO HOST
- 1.7 SCAN MODES
- 1.8 SCANNING TIMEOUT
- 1.9 DELAY BETWEEN RE-READ
- 1.10 READ REDUNDANCY FOR ALL SYMBLOGIES
- 1.11 ADDON SECURITY FOR UPC/EAN BARCODES
- 1.12 NEGATIVE BARCODES
- 1.13 EFFECTIVE DECODING AREA
- 1.14 USE DIRECT USB CABLE
- 1.15 PAGER BEEP DURATION
- 1.16 TIME STAMP
- 1.17 HARDWARE RESET
- SELECTING OUTPUT INTERFACE
- SET UP A WPAN CONNECTION
- CHANGE SYMBOLOGY SETTINGS
- 4.1 CODABAR
- 4.2 CODE 25 – INDUSTRIAL 25
- 4.3 CODE 25 – INTERLEAVED 25
- 4.4 CODE 25 – MATRIX 25
- 4.5 CODE 39
- 4.6 CODE 93
- 4.7 CODE 128
- 4.8 EAN-8
- 4.9 EAN-13
- 4.10 GS1-128 (EAN-128)
- 4.11 ISBT 128
- 4.12 MSI
- 4.13 FRENCH PHARMACODE
- 4.14 ITALIAN PHARMACODE
- 4.15 PLESSEY
- 4.16 GS1 DATABAR (RSS FAMILY)
- 4.17 TELEPEN
- 4.18 UPC-A
- 4.19 UPC-E
- DEFINING OUTPUT FORMAT
- APPLYING FORMATS FOR DATA EDITING
- SPECIFICATIONS
- FIRMWARE UPGRADE
- HOST SERIAL COMMANDS
- KEYBOARD WEDGE TABLE
- NUMERAL SYSTEMS
97
Update
The scanner can be configured to send data to a host computer wireless ly via the 3610
dongle, or to a notebook computer or PDA with Bluetooth
®
wireless technology. Upon
powering up, the scanner will be ready to establish a WPAN connection.
To establish a connection via 3610 after reading “Set Connection” and “Serial No.” barcodes …
Interface Option Reference
USB HID 2.4 USB HID via 3610
USB Virtual COM 2.5 USB Virtual COM (CDC) via 3610
To establish a connection via Bluetooth
®
dongle after pairing…
Interface Option Reference
Bluetooth
®
HID 2.1 Bluetooth® HID
Bluetooth
®
SPP 2.2 Bluetooth® SPP Slave, 2.3 Bluetooth®
SPP Master
IN THIS CHAPTER
3.1 Connecting via 3610 .................................................. 98
3.2 Connecting via Bluetooth
®
Dongle ...............................100
Chapter 3
SET UP A WPAN CONNECTION