User Manual
Manuals
Brands
CipherLab Manuals
Barcode Reader
1661
71
72
73
74
75
76
77
78
79
80
Table Of Contents
Important Notices
For USA
For Canada
For Hand-held Product with RF Functions
Safety Precautions
Care & Maintenance
Release Notes
Introduction
Getting Familiarized with 1660/1661 and 3610
Installing Batteries to 1660/1661
Charging the Battery for 1661
Charging the Battery via Charger
Using 3610
Inside the Package
Product Highlights
Symbologies Supported
Quick Start
Enter Configuration Mode
Exit Configuration Mode
Default Settings
Save User Settings as Defaults
Restore User Defaults
Restore System Defaults
Read a Setup Barcode
Configure Parameters
List the Current Settings
Create One-Scan Setup Barcodes
Understanding the Barcode Scanner
1.1 Battery
1.1.1 How to Operate the Scanner
1.1.2 Auto Power Off & Power-Saving
1.2 Memory
1.2.1 Transmit Buffer
1.2.2 Memory Mode
1.3 LED Indicator
1.3.1 Good Read LED
1.3.2 Good Read LED Duration
1.4 Beeper
1.4.1 Beeper Volume
1.4.2 Good Read Beep
1.4.3 Low Battery Alarm (1660)
1.4.4 Low Battery Alarm (1661)
1.5 Send “NR” to Host
1.6 Scan Modes
1.6.1 Continuous Mode
1.6.2 Test Mode
1.6.3 Default mode
1.6.4 Auto Off Mode
1.6.5 Auto Power Off Mode
1.6.6 Alternate Mode
1.6.7 Aiming Mode
1.6.8 Multi-Barcode Mode
1.7 Scanning Timeout
1.8 Delay between Re-read
1.9 Read Redundancy for All Symblogies
1.10 Addon Security for UPC/EAN Barcodes
1.11 Negative Barcodes
1.12 Effective Decoding Area
1.12.1 Positioning Window
1.12.2 Adjusting Window
Selecting Output Interface
2.1 BT HID
2.1.1 Activate BT HID & Select Keyboard Type
2.1.2 Reset Connection
2.1.3 Keyboard Settings
2.1.4 Inter-Function Delay
2.1.5 HID Character Transmit Mode
2.1.6 Keypad Support for iPhone/iPad
2.2 BT SPP Slave
2.2.1 Activate BT SPP Slave Mode
2.2.2 Inter-Function Delay
2.2.3 ACK/NAK Timeout
2.3 BT SPP Master
2.3.1 Activate BT SPP Master Mode
2.3.2 Inter-Function Delay
2.3.3 ACK/NAK Timeout
2.3.4 Switch between Master/Slave Mode
2.4 USB HID via 3610
2.4.1 Activate USB HID & Select Keyboard Type
2.4.2 Keyboard Settings
2.4.3 Inter-Function Delay
2.4.4 HID Character Transmit Mode
2.5 USB Virtual COM via 3610
2.5.1 Activate USB Virtual COM
2.5.2 Inter-Function Delay
2.5.3 ACK/NAK Timeout
Setting up a WPAN Connection
3.1 Connecting via 3610
3.1.1 Connect to 3610
3.1.2 Change Interface
3.1.3 Configure Related Settings
3.2 Connecting via Bluetooth® Dongle
3.2.1 Change Interface
3.2.2 Configure Related Settings
3.2.3 Connect to Dongle
Specifications
72
Enter Setup
1660 Barcode Scan
ner
User Guide
*Capital Lock OFF
1
...
...
78
79
80
81
82
...
...
105
