User's Manual

55
Update
Chapter 4 ! Ζ
4.2.3 CHECKSUM TRANSMISSION
Decide whether to include the checksum in the data being transmitted.
4.2.4 CODE LENGTH QUALIFICATION
Because of the weak structure of the 2 of 5 symbologies, it is possible to make a "short
scan" error. To prevent the "short scan" error, define the "Length Qualification" settings
to ensure that the correct barcode is read by qualifying the allowable code length.
 If "Max/Min Length" is selected, the maximum length and the minimum length must
be specified. It only accepts those barcodes with lengths that fall between max/min
lengths specified.
 If “Fixed Length” is selected, up to 2 fixed lengths can be specified.
1) Read the label to enable either Max. /Min. length qualification or fixed length
qualification.
*Transmit Industrial
25 Checksum
Do Not Transmit
*Do Not Verify
*Enable Max./Min.
Length (0 ~ 127) …
Enable Fixed Length(s) …