User's Manual

41
Update
The Bluetooth scanner can be configured to send data to a computer via a Bluetooth
dongle, or directly to a Bluetooth-enabled PDA or laptop. Upon powering up, the 1660
scanner will be ready for establishing a Bluetooth connection with a Bluetooth dongle.
Below is the procedure to configure the 1660 scanner before establishing a Bluetooth
connection.
1) Have the scanner read the “Enter Setup” label to enter the configuration mode.
2) Have the scanner read the desired Bluetooth interface label – “Activate Bluetooth
SPP” or “Activate Bluetooth HID & Select Keyboard Type”.
It supports PCAT – US, French, German, Italian, Swedish, Norwegian, UK, Belgium,
Spanish, Portuguese, and PS55 A01-2 – Japanese.
3) Have the scanner read the labels related to Bluetooth settings, such as Device Name
Broadcasting, Authentication & PIN Code, etc.
4) Have the scanner read the “Update” label to exit the configuration mode.
Once connected, be aware of the following notifications during operation –
 When getting out of range or powering off the cradle, the scanner will respond with
two short beeps (high-low tone) and its LED indicator will become blue, flashing
quickly.
 The power-saving feature of the scanner will automatically shut down the scanner
and stop a Bluetooth connection when it is idle for a specific period of time. The
scanner will respond with three beeps (tone descending from high to low) and its LED
indicator will become off.
IN THIS CHAPTER
3.1 Configuring Bluetooth Settings..................................... 42
3.2 Connecting via Bluetooth Dongle.................................. 44
Chapter 3
SETTING UP BLUETOOTH CONNECTIONS