User's Manual

36
Enter Setup
1600 Series Barcode Scanner User Guide
DIGITS TRANSMISSION
By default, the alphanumeric keypad is used for transmitting digits. Select “Numeric
Keypad” if you wish to use the keys on the numeric keypad.
Note: If you select “Numeric Keypad”, the Num Lock status of the physical keyboard
should be "ON". This setting is not supported on PDAs.
2.1.4 INTER-FUNCTION DELAY
By default, the inter-function delay is set to zero. Specify a value, ranging from 0 to 255,
to match the computer response time of the keyboard interface. Such delay time is
inserted between every function code (0x01 ~ 0x1F) being transmitted. The longer the
delay time is, the slower the transmission speed will be.
*Alphanumeric Key
Numeric Key
Ignore Case
*Case-sensitive