User's Manual

16
Enter Setup
1600 Series Barcode Scanner User Guide
1.3.1 GOOD READ LED
1.4 BEEPER
The scanner has a buzzer to provide user feedback in various operating conditions.
1.4.1 BEEPER ON 1660
Beeping Meaning
One long beep, high tone Power on
One short beep, low tone Power off
One short beep, high tone
 Programmable, default to 4 KHz
Good Read
Six short beeps
 High-low tone repeats three times
 Enter Configuration Mode
 Exit Configuration Mode
Two short beeps, low-high tone Setup label read successfully
One short beep, high tone More setup label required
One long beep, low tone
 Transmit Buffer Full
 Configuration Error (Wrong label…)
Two short beeps, low-high tone Memory Mode – Memory Full
Two long beeps, high-low tone Multi-Barcode Mode – Buffer Full
Three short beeps
 Tone ascending from low to high
 Bluetooth connection established
 Bluetooth connection resumed
Two beeps, high-low tone Bluetooth connection out of range
Three short beeps, low tone No Bluetooth connection
*Enable Good Read LED
Disable Good Read LED