User's Manual

13
Update
Chapter 1 ! Ζ
1.2 MEMORY
The collected data can be sent back to a host computer one by one via the transmit
buffer (SRAM) or stored in flash memory when the scanner is set to Memory mode.
1.2.1 TRANSMIT BUFFER
The 1 KB transmit buffer on the scanner can store up to 64 scans based on EAN-13
barcodes. When it is used up, the scanner will respond with one long beep (low tone) as
a warning.
 You are advised to get back to range if using the Bluetooth scanner.
1.2.2 MEMORY MODE
The scanner keeps 128 KB flash memory for memory mode operation. When the 1660
scanner is in memory mode, it means Bluetooth connection is disabled.
Warning: Bluetooth cannot work unless memory mode is disabled.
MEMORY DATA DELAY
You may set a delay between each data record while transmitting data back to the
server.
Enable Memory Mode
*Disable Memory Mode
*None
250 ms