User's Manual

136

Enter Setup

1600 Series Barcode Scanner User Guide

EXAMPLE

Send the serial commands via RS-232 interface or Bluetooth SPP. For example, run

HyperTerminal on the host computer.

 For the scanner to change the beeper to medium volume and beep –

#@101011<CR>

#@////<CR>

 For the scanner to change the beeper to minimal volume and beep –

#@101010<CR>

#@////<CR>

 For the scanner to change the beeper frequency to 8 kHz (for Good Read Beep only)

and beep –

#@101001<CR>

#@////<CR>

 For the scanner to change the beeper length to longest (for Good Read Beep only)

and beep –

#@101008<CR>

#@////<CR>