User's Manual

114
End Programming Format
1600 Series Barcode Scanner User Guide
DATA LENGTH
By default, barcodes of any length (character count) are eligible for data editing.
 You may specify a value from 0 to 255.
 When zero is given to both, the scanner will not perform the length qualification.
1) Read the labels for Max. /Min length separately.
2) Read the “Decimal Value
” label on page 123 for the desired length.
3) Read the “Validate” label on the same page to complete this setting.
MATCHING STRING & LOCATION
By default, no matching string is specified, and therefore, it is disabled. You may enable
this feature by specifying a matching string; up to four characters are allowed.
 When the Matching String Location is zero, the scanner will only check for the existence of the
matching string in the barcode data.
 You may specify a value from 1 to 255 to indicate where the matching string starts in the
barcode data.
UPC-E Applicable UPC-E Addon 2 Applicable
UPC-E Addon 5 Applicable
Max. Length
Min. Length