Specifications

36
Enter Setup
1660 Barcode Scanner
User Guide
2.1 BLUETOOTH HID
Refer to Chapter 3 – Setting up Bluetooth Connections for related connection settings.
Bluetooth HID Settings
Defaults
Keyboard Type PCAT (US)
Digits Layout Normal
Capital Lock Type Normal
Capital Lock State Off
Alphabets Transmission Case-sensitive
Digits Transmission Alphanumeric keypad
Inter-Function Delay 0 (ms)
Send “NR” to Host Disable
2.1.1 ACTIVATE BLUETOOTH HID & SELECT KEYBOARD TYPE
By default, Bluetooth HID is activated on the 1660 scanner, and the keyboard type is set
to PCAT (US). When Bluetooth HID is re-activated, you will have to select a keyboard
type to complete this setting.
1) Read the label above to activate Bluetooth HID and select a keyboard type.
2) Read the “
Decimal Value” label on page 141. Refer to the table below for the number
of desired keyboard type.
3) Read the “Validate” label on the same page to complete this setting.
Keyboard Type
By default, the keyboard type is set to PCAT (US). The following keyboard types are supported –
No. Keyboard Type No. Keyboard Type
64 PCAT (US) 70 PCAT (UK)
65 PCAT (French) 71 PCAT (Belgium)
66 PCAT (German) 72 PCAT (Spanish)
67 PCAT (Italy) 73 PCAT (Portuguese)
68 PCAT (Swedish) 74 PS55 A01-2 (Japanese)
69 PCAT (Norwegian) 75 User-defined table
Activate Bluetooth HID & Select Keyboard Type …