Specifications

13
Update
Chapter 1
Understanding the Barcode Scanner
Auto Power Off after establishing a Bluetooth connection successfully...
Once a Bluetooth connection is established successfully, if the scanner is idle during the specified
time interval, it will automatically turn off as well. However, the scanner will resume connection
with the host upon powering on again, as long as the host application is running.
1) Read the label above to specify the time interval before the scanner automatically
turns off.
2) Read the “
Decimal Value” label on page 141. For example, read “1” and “5” for the
scanner to automatically turn off after being idle for 15 minutes.
3) Read the “Validate” label on the same page to complete this setting.
A
uto Off after 0~254 minutes (*10)