User Manual
Table Of Contents
- Important Notices
- Release Notes
- Introduction
- Quick Start
- Understanding the Barcode Scanner
- 1.1 Battery
- 1.2 Memory
- 1.3 LED Indicator
- 1.4 Beeper
- 1.5 Send “NR” to Host
- 1.6 Scan Modes
- 1.7 Scanning Timeout
- 1.8 Delay between Re-read
- 1.9 Read Redundancy (1D)
- 1.10 Addon Security for UPC/EAN Barcodes
- 1.11 Effective Decoding Area
- 1.12 Negative Barcodes
- 1.13 Operation Mode
- 1.14 Imager Preferences
- 1.15 Signature Capture
- Selecting Output Interface
- Setting up a WPAN Connection
- Specifications
84
Enter Setup
1564 Barcode Scanner User Guide
2.4.1 ACTIVATE KEYBOARD WEDGE & SELECT KEYBOARD TYPE
When Keyboard Wedge interface is activated, you will have to select a keyboard type to
complete this setting.
Activate 3656
Keyboard Wedge &
Select Keyboard
Type…
1) Read this barcode above to activate Keyboard Wedge and select a keyboard type.
2) Read the “
Decimal Value” barcode on page 錯誤! 尚未定義書籤。. Refer to the table
below for the number of desired keyboard type.
3) Read the “Validate” barcode on the same page to complete this setting.
Keyboard Wedge via 3656
By default, the keyboard type is set to PCAT (US). The following keyboard types are supported
when using 3656 with the keyboard wedge cable provided —
No. Keyboard Type No. Keyboard Type
1 PCAT (US) 16 PS55 001-2
2 PCAT (French) 17 PS55 001-82
3 PCAT (German) 18 PS55 001-3
4 PCAT (Italian) 19 PS55 001-8A
5 PCAT (Swedish) 20 PS55 002-1, 003-1
6 PCAT (Norwegian) 21 PS55 002-81, 003-81
7 PCAT (UK) 22 PS55 002-2, 003-2
8 PCAT (Belgium) 23 PS55 002-82, 003-82
9 PCAT (Spanish) 24 PS55 002-3, 003-3
10 PCAT (Portuguese) 25 PS55 002-8A, 003-8A
11 PS55 A01-1 26 IBM 3477 Type 4 (Japanese)
12 PS55 A01-2 (Japanese) 27 PS2-30
13 PS55 A01-3 28 IBM 34XX/319X, Memorex Telex 122 Keys
14 PS55 001-1 29 User-defined table
15 PS55 001-81 30 PCAT (Turkish)