User Manual
Table Of Contents
- Important Notices
- Release Notes
- Introduction
- Quick Start
- Understanding the Barcode Scanner
- 1.1 Battery
- 1.2 Memory
- 1.3 LED Indicator
- 1.4 Beeper
- 1.5 Send “NR” to Host
- 1.6 Scan Modes
- 1.7 Scanning Timeout
- 1.8 Delay between Re-read
- 1.9 Read Redundancy (1D)
- 1.10 Addon Security for UPC/EAN Barcodes
- 1.11 Effective Decoding Area
- 1.12 Negative Barcodes
- 1.13 Operation Mode
- 1.14 Imager Preferences
- 1.15 Signature Capture
- Selecting Output Interface
- Setting up a WPAN Connection
- Specifications
60
Enter Setup
1564 Barcode Scanner User Guide
1.14.4 IMAGE FILE FORMAT
Select an image format for storing captured images.
*JPEG
BMP
TIFF
1.14.5 BITS PER PIXEL
Select the number of significant bits per pixel (BPP) to use when capturing an image.
Select 1 BPP for a black and white image, 4 BPP to assign 1 of 16 levels of grey to each
pixel, or 8 BPP to assign 1 of 256 levels of grey to each pixel.
Note: The decoder ignores these settings for JPEG files, which always use 8 BPP.
1 BPP
4 BPP
*8 BPP