User Manual
Table Of Contents
- Important Notices
- Release Notes
- Introduction
- Quick Start
- Understanding the Barcode Scanner
- 1.1 Battery
- 1.2 Memory
- 1.3 LED Indicator
- 1.4 Beeper
- 1.5 Send “NR” to Host
- 1.6 Scan Modes
- 1.7 Scanning Timeout
- 1.8 Delay between Re-read
- 1.9 Read Redundancy (1D)
- 1.10 Addon Security for UPC/EAN Barcodes
- 1.11 Effective Decoding Area
- 1.12 Negative Barcodes
- 1.13 Operation Mode
- 1.14 Imager Preferences
- 1.15 Signature Capture
- Selecting Output Interface
- Setting up a WPAN Connection
- Specifications
51
Update
Chapter 1
1. Read the barcode above to specify a fixed exposure value.
2.
Read the “
Decimal Value” barcode on page
錯誤
!
尚未定義書籤。
. For example, read “1” and “5”
for setting the exposure value to 1.5 ms.
3. Read the “Validate” barcode on the same page to complete this setting
Fixed Gain
1~100 (*100)
4. Read the barcode above to specify a fixed gain value.
5.
Read the “
Decimal Value” barcode on page
錯誤
!
尚未定義書籤。
. For example, read “3” and “0”
for setting the gain value to 30.
6. Read the “Validate” barcode on the same page to complete this setting.