User manual

2 Sec
1 Sec
Clear Stored Data
Enable Scan & Store
Clear Stored Data
0.5 Sec
0.25 Sec
Transmit Stored Data
CIPHER 1560/62 BLUETOOTH BARCODE READER OPERATION MENU
Copyright
DaTaMaN Barcode Systems
Set for Remote Data
Collection Mode
Start Instruction Mode
1
2
Update (Exit) Instruction Mode
3
START
(Wait for Red light to blink)
1
Confirm (Wait for response beep)
3
Disable Scan & Store
4
Update (Exit) Instruction Mode
5
2
Steps for Downloading Data to the Server
Begin
Instruction Mode
1
Transmit Delay
2
2
3
Confirm (Wait for response beep)
5
Finish Instruction Mode
6
4
Set for Normal Operation
Clear stored data if
downloading has been
completed successfully.
DaTaMaN Barcode Systems
Tel:- 088 322 7675
Fax:- 088 322 7288
P.O. Box 855
Happy Valley S.A. 5159
www.datamanbarcode.com.au
Note:-
When set for remote data collection mode the
blue flashing light on the BT-communication
stand will revert to a slow flash, this is normal.
While in remote data collection mode direct
and immediate real time communication with
the server via the 3656 BT-stand will cease.
Proceed to and complete the
Finish Instruction Mode
command to initiate the data
download to the server.
A delay between each
data record transmission
to the server can be set to
allow adequate time for
data to be processsed.