User guide

86
ScanMaster User Guide
3.8 EAN-8
3.8.1 FOR 1D SCANNERS
By default, the scanner is set to read EAN-8 barcodes. (= No Addon)
Options of 2-digit and 5-digit extensions are available. Select the check box so that it can
read Addon 2 and/or Addon 5.
 Advanced settings are provided as shown below.
EAN-8 Family
Select the check box to enable at least one type of the EAN-8 barcodes.
 EAN-8 (No Addon)
 EAN-8 Addon 2
 EAN-8 Addon 5
Convert to EAN-13
Decide whether to expand the read EAN-8 barcode, as well as its addons, into EAN-13.
 After conversion, the data follows EAN-13 format and is affected by EAN-13 programming
selections (e.g. Check Digit).
Transmit Check Digit
The check digit will be included in the data being transmitted.
Cancel the check box if the check digit is not desired.