User's Manual

1.03 Oct. 30, 2009

Modified: 1.10 Auto-Sense Mode (1560P Only) — Continuous mode
as an alternative
 Modified: 1.13 Symbologies Supported —
ISBT 128 enabled by
default
 Modified: 5.2.2
Symbologies for Character Substitution (All 3
Sets) — add ISBT 128
 Modified: 5.4.1 Select Pre-defined Code ID — add ISBT 128
 Modified: 5.4.2 Change Code ID — add ISBT 128
 Modified: 5.5 Length Code — add ISBT 128
 Modified: 6.3.1 Applicable Code Type (for Editing Format) —
add
ISBT 128
1.02 July 07, 2009
 Modified: Charging the Battery via 3656 —
charging time changed
from 3 to 5 (hr)
 Modified: 1.1 Battery — charging time changed from 3 to 5 (hr)
 Modified: 1.1.2 Auto Power Off & Power-Saving —
add setup barcode
for Power-Saving setting (101021)
 Modified: 3.2.2 Configure Related Settings — Authentication
1.01 June 3, 2009
 Modified: 1.10 Auto-Sense Mode — Power supply cord is required.
 Modified: Appendix II Host Serial Commands
1.00 Apr. 29, 2009 Initial release