User's Manual

1.06 Nov. 30, 2010
 Modified: Introduction, Symbologies Supported —
add support of
more RSS symbologies
 New: Introduction — Charging the Battery via Charger
 Modified: 1.1.2 Auto Power Off & Power-Saving
 Modified: 1.4 Beeper — describe “Low Battery Alarm”
 New: 2.1.6 Keypad Support for iPhone/iPad
 Modified: 3.2.3 Connect to Dongle —
describe random PIN in Step
12
 Modified: 4.16 GS1 DataBar (RSS Family)
 Modified: 4.16.2 GS1 DataBar Omnidirectional (RSS-14)
 Modified: 4.16.3 GS1 DataBar Expanded (RSS Expanded)
 Modified: 5.2 Character Substitution —
add table for Scan
Code/Normal Key
1.05 Apr. 09, 2010
 Modified: 1.1.2 Auto Power Off & Power-Saving
 Modified: 2.1.1 Activate BT HID & Select Keyboard Type —
add
Turkish
 Modified: 2.1.3 Keyboard Settings — BT HID supports “Alphabets
Layout”
 Modified: 2.1.5 HID Character Transmit Mode
 Modified: 2.2 BT SPP Slave
 Modified: 2.3 BT SPP Master
 Modified: 2.4.1 Activate Keyboard Wedge & Select Keyboard
Type — add Turkish
 Modified: 2.5.2 Baud Rate — add setup barcode
for 4800 bps
(100100)
 Modified: 2.5.2 Baud Rate —
change default baud rate to 115200
bps
 Modified: 2.6.1 Activate USB HID & Select Keyboard Type —
add
Turkish
 Modified: 2.6.2 Keyboard Settings — USB HID supports “
Alphabets
Layout”
 Modified: 2.6.4 HID Character Transmit Mode
 New: 3.1.3 Configure Related Settings — Sniff Mode
 Modified: 4.9.4 Security Level
 Modified: Appendix III Keyboard Wedge Table —
remove settings for
user-defined scan code
 Modified: Appendix III Keyboard Wedge Table — provide examples
1.04 Mar. 02, 2010
 Modified: Charging the Battery via 3656 —
suggest connecting
power cord for USB