User guide

You may configure in which format the collected data will be output to the host computer.

Barcode read by the scanner will be processed in the following sequence –

1) Perform character substitution on the data scanned.

2) Add

Code ID

and Length Code to the front of the data: [Code ID][Length Code][Data]

3) Process the whole data in step 2 with user formats. Data is now divided into fields by

user specified rules.

4) Add

Prefix Code

and Suffix Code before transmission: [Prefix Code][Processed

Data][Suffix Code]

Refer to

How to Configure the Scanner

for the flow chart of data process.

IN THIS CHAPTER

4.1 Character Substitution................................................ 56

4.2 Prefix/Suffix Code ...................................................... 57

4.3 Code ID.................................................................... 59

4.4 Length Code.............................................................. 62

Chapter 4

DEFINING OUTPUT FORMAT