User guide

34
ScanManager User Guide
No Authentication
By default, it is set to “No PIN”, which depends on the setting of the target device. (No PIN = No
authentication.)
2.4.2 DEVICE NAME BROADCASTING
The scanner can be configured to hide itself from other devices equipped with Bluetooth
®
wireless technology. Simply disable the device name broadcasting setting so that it won’t
be discovered by any other computer or PDA. However, broadcasting must be enabled for
establishing an initial connection with the scanner.
For example, you can disable device name broadcasting after successfully connecting the
scanner to WorkStation1. Such connection will be maintained automatically unless the
scanner is removed from the paired device list (called unpairing) by WorkStation1 or any
changes made to authentication and the PIN code. If you want WorkStation2 to connect
to the scanner, you will have to enable device name broadcasting first.
Note: By default, device name broadcasting is enabled (which is required for initial
connection).