Specifications

25
Update
Chapter 1 Understanding the Barcode Scanner
1.4 BEEPER
The scanner has a buzzer to provide user feedback in various operating conditions.
Beeping
Meaning
One long beep, high tone Power on, with red LED on (1 second) and off quickly
One short beep, high tone
 Programmable, default to 4 KHz
Good Read, with red LED on and off quickly
Six short beeps
 High-low tone repeats three times
 Enter Configuration Mode, with blue LED on
 Exit Configuration Mode
Two beeps, high-low tone Setup barcode read successfully
One short beep, high tone More setup barcode required
One long beep, low tone Configuration error (Wrong barcode…)
Three short beeps, tone ascending from
low to high
 WPAN connection established, with blue LED
flashing (On/Off ratio 1:6)
 WPAN connection resumed, with blue LED flashing
(On/Off ratio 1:6)
Three short beeps, tone ascending from
high to low
 WPAN connection out of range
 WPAN connection suspended for RF Auto-Shutdown
(via 3666 only)
Three short beeps, low tone
 No WPAN connection
 Transmit buffer full
 Memory Mode – Memory full