User's Manual

Enter Setup

Scanner Configuration SmartScan Manual

Serial Command

0068

Serial Command

0069

Auto Power Off Mode Alternate Mode

Serial Command

0070

Serial Command

0071

Momentary Mode Repeat Mode

Serial Command

0072

Serial Command

0073

(Default for

1100/1105/1166/1200/1266)

Test Mode

2.4 AUTO-SENSE MODE (1100 ONLY)

Serial Command

0333

Serial Command

0332

Enable <Disable>

2.5 SCANNER TIME-OUT

1) Read this label to specify the time interval before the scan engine times out in Laser, Auto Off, or

Auto Power Off mode.

2) Read the “Decimal Value

” label on page 57. For example, read “1” and “0” for the scanner to

automatically shut down after being idle for 10 seconds.

3) Read the “Validate” label on the same page to complete this setting.

Serial Command

0207

Scanner Time-

Out

after … seconds

2.6 DELAY BETWEEN RE-READ

Serial Command

0336

Serial Command

0337

100 ms 200 ms