User's Manual

Cipherium Repeater
Administrator’s Manual
79
Guest User List: The Repeater provides 10 groups for the Guest User List. If you wish to
open a certain Guest User List, you just need to key in the corresponding Password in the
password column, and then click “Apply” to complete the setup for the Guest User
Configuration as shown in Figure 5-65.
Session Length: It restricts the session used by the Guest User List. The default session length
is set to 6 hours , and the limit range is from 1 to 12 hours. After you select the Active Guest
User, it is necessary to click “Apply” to enable this function.
Figure 5-65 Example of Guest User Management Interface
5.2.5 Roaming Configuration
The system provides Repeater and GRIC Server for roaming, and you only need to set up the
related parameter in this page to enable the user of the GRIC Server to use the Repeater. These
settings will be effective immediately after you click the “Apply” button.
The GRIC user will be able to use the webpage gric.shtml, and is provided with username,