User's Manual

Cipherium Repeater
Administrator’s Manual
71
If POP3 is used for the Public LAN, you just need to set the Public LAN mechanism to POP3.
The setup for primary server or secondary server is available. Enter the IP address or domain
name of the Primary POP3 Server and its Primary POP3 Server port. Such setup will be
enabled immediately after you click the “Apply” button. (It is not compulsory to set up the
Secondary POP3 Server).
Figure 5-55 POP3 Setup Screen
Enable SSL Connection: if you select this option, POP3 Protocol will do the Authentication.
3. RADIUS
The RADIUS server sets the external Authentication for user accounts. The setup for primary
server or secondary server is available, and such setup will be enabled immediately.
802.1X Public LAN: Select to enable 802.1X as needed. Click the hyperlink “Edit” to enter
the edit interface of the 802.1X.