User's Manual

Cipherium Repeater

Administrator’s Manual

Preferred Authentication Method: This Authentication method is put to be the Preference.

Authentication Policy: It is the preferred Authentication group.

Authentication Methods Configuration: Authentication method setup.

Authentication Policy: The system provides 5 policy groups for your choice. Select the

desired control group from the pull-down menu.

Preferred Authentication Method: After selecting the item, it means that the selected setup

control group as shown above is the preferred Authentication method.

Policy Name: In the postfix of this management setup, the Repeater system will control the

priority according to the following postfix when the user logs in the system.

Policy Status: You can select Enable (default) or Disable. If you select Disable, then such

postfix will be disabled.

Warning: Policy Name cannot use those words : GRIC, MAC, IP

Figure 5-47 Example of Authentication Policy(2)